|S6 Multi Balance Charger
Operating voltage DC 11-18 volts
Idling current approx. 100mA
Charge/Discharge power max. 80/8W
NiCd/MH 1~15 cells
LiIo/LiPo/LiFe 1~6 series
Charge current 0.1 to 5A
Discharge current 0.1 to 1A
No. of cycle 1 to 5 times
Battery data memory up to 5 data
Computer USB port
Temperature sensor port
Lithium battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity 5 to 20mV
NiMH Delta-peak voltage sensitivity 5 to 20mV
Battery temperature cut-off 20 to 80C or OFF
Waste time between charge/discharge 1 to 60 min.
Trickle charge mode ON/OFF, up to 200mA
Integral timer limit for safety 10 to 720 min.or OFF
Maximum charging capacity limit for safety 10 to 9990mAh or OFF
Key beep and buzzer sound ON/OFF
Input power low alert 10 to 11V
Optimized operating software
When charging or discharging, the smart charger offers an AUTO function that
sets the feeding current or the cell count of the Lithium battery automatically.
For Lithium batteries, this can prevent an over-charging situation which can
lead to an explosion should the user not set the program correctly. Every
program in the unit is programmed with safety monitoring to validate the user
information to ensure maximum safety. These parameters can be set by the user.
High-power and high-performance circuit
The smart charger employs a circuit that has maximum output power of 50W. As a
result, the smart charger can charge or discharge up to 15 cells of NiCd/NiMH
and 6 series of Lithium batteries with maximum current of 5.0A.
Individual voltage balancer for
Lithium batteries inside
Built into the smart charger is an individual-cell-voltage balancer. No external
balancer is needed when charging Lithium batteries (LiIo/LiPo/LiFe) for balance
Balance individual cells on
The smart charger also can monitor and balance individual cells of the Lithium
battery pack during the discharge process, as well as the charge process. If the
voltage of any one cell varies abnormally, the process will be stopped with the
Accept various types of Lithium
The smart charger can accept three types of Lithium batteries - LiIo, LiPo and
LiFe. They have different characteristics by their chemistry, such as minimum,
maximum, and charge termination voltages.
Lithium battery Fast and Storage
The smart charger offers additional Lithium programming. Fast charge reduces the
charging time of the Lithium battery and the Storage mode controls the final
voltage of the battery to be suit for long time storage.
5 data of different batteries programs can be stored and retrieved. These data
files can be receptive at any time you need them without reprogramming.
The smart charger can perform 1 to 5 cycles of charge>discharge or
discharge>charge for battery break in/refreshing and balancing.
PC based analysis using USB
For the advanced user, the smart charger INCLUDES a PC based program that can
analyze the characteristic of the battery through the computers USB port. The
software will graph voltage, current, capacity and temperature curves. It also
shows the individual voltages of each cell in the Lithium battery pack.
Back-light LCD screen
Include LCD display
Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the
Advanced temperature sensor cable
port(sensor cable included)
An optional temperature probe contacting the surface of the battery to monitor
the battery temperature during charging can be used
This unit comes with cables shown as well as CD & Manual